The ‘Lead scrap recovery’ is an automatic conveyor system for the lead scraps that come from the cutter and end up in the lead melting furnaces.

The system is made up of the following devices:

1. TNEL and TND model inclined belt conveyors

The belt conveyors have the task of transporting the lead scraps inside a container.
These are designed and made specifically for lead cutouts.

2. Container Elevator

The container elevator lifts the containers from level 0 to the discharge level, where the scraps are discharged into the storage silos. The system is completely automatic:
A manually opened safety gate is opened by the. The container is loaded onto the loading plane of the elevator.
After loading, the gate is closed by the operator and the start button
is pressed. The gate is controlled by means of a safety relay, so that if it were to open, the system would stop automatically, shutting down the electrical supply. The discharge plane is equipped with a tipper with a 90-degree hinge.
This allows to discharge all of the scraps that are inside the container.

3. SC20 Scrap Storage Silo

Scraps storage silo with capacity of 20 tons equipped with a discharge system into a vibrating hopper.
Weighing system
N.1 weighing system composed of n.4 load cells and anti-blocking system.
Scrap management is done by means of a conveyor belt with an automatic exchange system. Weighing capacity is (0÷50) kg by step.