Ball Mill MOP30 – Product Overview
Product Name: Ball Mill MOP30
The MOP30 is a lead oxide ball mill with a production capacity of 30.000 kg of lead oxide (PbO) in 24 hours, with an oxidation of 72% (± 2 points) and an acid absorption between (200÷260) mg H2SO4/g of lead oxide. The MOP30 is equipped with a 60t capacity cylinder or shavings silo, a mill climate room and a process baghouse with horizontally arranged sleeves. A Siemens PLC interfaced with an electrical control panel is supplied for the management and control of the mill functions.
- Cylinder/Shavings Silo
Silo with a nominal capacity of 60.000 kg, constructed with steel sheeting, with a support structure which stands on 3 points. The silo will be equipped with a vibrating channel for loading the feed material into the ball mill and weighing system.
- Vibrating channel
The feeding system (cylinders or shavings) is made up of a vibrating channel designed by CAM over 30 years ago. It is a system that adds the material 50 kg at a time. This is done by continuous weighing of the silo by means of n. 3 load cells which are capable of weighing even the material in the vibrating system precisely.
- Crown – Pinion gear drive
The CAM MOP series ball mills were designed over 30 years ago with a crown and pinion drive system. This is a durable and reliable system, considering that the first models of ball mills are still working with their original crowns. We have never had to replace a crown in the history of CAM.
- Climate chamber
MOP30 is installed in a climate chamber constructed using thick insulated sandwich panels. The chamber has the purpose of maintaining the flow of conditioned air, so as to prevent ‘cold spots’, and reducing the noise produced by the mill.
- Electrical Cabinet
The ball mill is equipped with a general electrical control cabinet for process control. The control system is based on a Siemens or Rockwell PLC, developed to control the working conditions within a minimum range of variation, in order to assure a constant level of quantity and quality of the oxide produced. The software controls the automatic safety procedures in case of alarm activation, as well as weight, temperature and depression of the plant. The system also is equipped with an OP panel with graphic functions which allows the visualization of working conditions and of the plant, facilitating process control for the operators.
The control cabinet can be equipped with a SCADA system which allows online monitoring of the entire process.
- CAM process filter
Automatic bag house filter to collect lead oxide dust and to filter exhaust air. Lead emissions at filter exit lower than 0,5 mg/m3. The bag house consists of the following items:
- 442 high temperature resistant bags
- Main exhaust fan which takes air from the mill and regulates the air flow by means of an inverter which controls the rotation speed of the fan.
- Automatic contra-flow cleaning system with a pulsating shuttle blower.
- Alarm controls for temperature and high differential pressure inside the bag house.
- Bag house support structure with relative access stairs and catwalks
PRODUCTION: (22÷24) t/d
MOP30 BALL MILL DIMENSIONS: L 5300 x W 15326 x H 7350 [mm]
Lead Oxide Properties:
Free lead 27±3%
Grain Size < 44 mm: (94÷98) %
Mean particle size (1.8÷2.5) mm
Apparent SCOTT density (1,00÷1,10) g/cm³
Tamped density Ind. (2,9÷3,3) g/cm³ – automotive: (2,5÷2,9) g/cm³
Water absorption: (10.5÷12.5) cm³ >H2O/100g oxide
Sulfuric acid absorption: (200÷260) mg H2SO4/g PbO
Reactivity to sulfuric acid (20÷60) s
COOLING WATER: FLOW 1200 l/h; PRESSURE (2÷) bar; INLET TEMPERATURE (18÷25) °C;
PIPE SIZE INLET: 1/2 “; PIPE SIZE OUTLET: 3/4 “
COMPRESSED AIR: FLOW 2000 l/h; PRESSURE 6 Bar; PIPE SIZE INLET: 1/2 “
ELECTRIC ENERGY: INSTALLED POWER 191 kW; 400 V 3ph; 50 Hz.